Measuring and recording Earth Ground Resistance is important to maintain an electrical system. The Amprobe GP-2A Earth Ground Resistance Tester is one such device that can handle these tests. Having poor grounding can lead to premature equipment failure and extended downtime which can be quite costly to a company’s operations. The handheld unit is lightweight (2.2lbs) features an easy to read display and has a simple to navigate menu system.
The Amprobe Solar-500 and Solar-600 are no longer manufactured
Today I will be reviewing the Amprobe Solar-500 and Solar-600 Solar Analyzers. Like their name implies they allow you to analyze solar panels.
From basic maintenance, troubleshooting or efficiency testing, these two solar analyzers have you covered. If you are an installer, this is an especially important tool as it will help you calculate and determine proper inverter size as well as positioning of the solar voltaic cells for maximum output.
For today’s review I will be going over a classic Clamp Meter from Amprobe. The Amprobe ACD-51NAV is a CAT IV 600A TRMS Clamp Meter used for maintenance and spot checking purposes.
This unit measures up to 1000V and can handle power measurements as well as THD (Total Harmonics Distortion) and Individual Harmonics. The Navigator clamp allows for non-contact voltage detection as well as measuring Inrush currents.
Hello again to everyone. Today we’re going to take a look at an innovative, top-of-the-line wire tracer that was just recently released by Amprobe – the Amprobe AT-7030 Advanced Wire Tracer Kit. This unit packs a real punch with tons of features both standard and unique to make a one-of-a-kind device.
Amprobe AT-7020 Wire Tracer is no longer manufactured
The AT-7020 is the newest offering from Amprobe for Wire Tracing. This meter features many new upgrades to any existing Wire Tracer you may already have.
Amprobe has released the new 300 series of Industrial Clamp meters. Today I will be reviewing the AMP-310 HVAC Clamp Meter which is the entry level version of this series. This model is CAT III 600V safety rated and features True-RMS for voltage readings you can depend on. Some useful functions for this meter in regards to HVAC specific testing are DC Microamps, Diode Test, Temperature readings via Type K Thermocouple slot, and Inrush Current measurement.
The Amprobe AT-6030 locates energized and de-energized wires, breakers, and fuses. The AT-6030 comes equipped with a transmitter and receiver to easily detect signals in wires or cables behind walls, ceilings, and floors, along with the CT-400 Signal Clamp.
Amprobe AT-2005 and AT-2005A are no longer manufactured.
In many industrial places, hospitals and large buildings electrical circuits run in metalic conduits. It’s a great way to protect cables, but when it comes to tracing them behind walls it might be an impediment, as such conduits tend to depress the signal. The only way to trace wires successfully over-and-over again is by using wire tracer with signal booster.
