Main page content
Bacharach Fyrite InTech vs Fyrite Insight Plus Combustion Analyzers Review: Field Test Evaluation
Executive Summary
When you stand in front of a faulty heater, one question matters most. Will this tool help you fix the problem faster, safely, and reliably? Just as important, is it worth the money?
The Bacharach Fyrite InTech (H0024-8511) and Bacharach Fyrite Insight Plus (H0024-8517) share the same proven American platform. Both use B-Smart pre-calibrated CO sensors for fast sensor swaps in your truck without calibration gas. Both also run on four AA batteries and send reports via on-screen QR codes.
In the field, however, these two instruments live in very different toolbags. The Fyrite InTech H0024-8511 is a lightweight residential workhorse built for basic O2, CO, and stack temperature checks. The Fyrite Insight Plus H0024-8517 is a complete diagnostic station for light-commercial and boiler technicians.
The Insight Plus doubles the CO ceiling and adds an integral NOx filter. It also includes a built-in differential draft manometer, a three-year O2 sensor, a magnetic boot, and a hard case. Choosing the right model comes down to the heating equipment you service every day.
AZ Testers Technician Score: Side-by-Side Rating
| Evaluation Category | Bacharach Fyrite InTech (H0024-8511) | Bacharach Fyrite Insight Plus (H0024-8517) |
|---|---|---|
| Performance | 8.2 / 10 | 8.8 / 10 |
| Accuracy | 8.6 / 10 | 8.9 / 10 |
| Ease of Use | 9.0 / 10 | 8.7 / 10 |
| Durability | 7.8 / 10 | 8.6 / 10 |
| Features | 7.4 / 10 | 8.9 / 10 |
| Safety | 8.5 / 10 | 8.8 / 10 |
| Value | 8.8 / 10 | 8.5 / 10 |
| Overall Technician Score | 8.3 / 10 - AZ Testers Recommended | 8.7 / 10 - AZ Testers Recommended |
Quick Takeaways by Model
- Bacharach Fyrite InTech (H0024-8511) Best For: Residential HVAC service technicians and installers tuning standard natural gas, propane, and No. 2 oil furnaces or water heaters.
- Bacharach Fyrite InTech (H0024-8511) Best Feature: Low upfront investment paired with zero-downtime B-Smart CO sensor swaps in the field.
- Bacharach Fyrite InTech (H0024-8511) Main Weakness: Lacks an internal draft manometer and ships in a soft bag without a magnetic rubber boot.
- Bacharach Fyrite Insight Plus (H0024-8517) Best For: Light-commercial HVAC technicians and boiler mechanics who need draft testing, manifold pressure, and NOx-filtered CO analysis.
- Bacharach Fyrite Insight Plus (H0024-8517) Best Feature: Built-in differential pressure manometer, 4,000 ppm NOx-filtered CO sensor, and three-year O2 sensor in a hard case with a magnetic boot.
- Bacharach Fyrite Insight Plus (H0024-8517) Main Weakness: Higher upfront cost, and the standard H0024-8517 kit omits the mini-USB PC cable and wireless thermal printer.
Head-to-Head Specifications and Field Impact
Manufacturers love listing sensor tolerances and temperature limits on spec sheets. Those numbers mean very little until you translate them into real jobsite performance. Here is how the H0024-8511 and H0024-8517 compare in the field.
| Parameter / Spec | Fyrite InTech (H0024-8511) | Fyrite Insight Plus (H0024-8517) | Service Technicians Field Impact |
|---|---|---|---|
| CO Range and Filtration | 0 to 2,000 ppm (standard B-Smart CO cell) | 0 to 4,000 ppm (B-Smart CO cell with integral NOx filter) | Insight Plus handles high-CO commercial startups and stops nitric oxide from causing false CO spikes. |
| Oxygen (O2) Sensor Life | Standard 2-year O2 sensor (field replaceable) | 3-year Long-Life O2 sensor (field replaceable) | Insight Plus cuts O2 sensor replacement frequency and long-term maintenance costs by roughly a third. |
| Draft and Gas Pressure | None (requires a separate manometer) | Built-in differential pressure sensor with dual ports | Insight Plus lets you watch manifold gas pressure or chimney draft live while adjusting burner combustion. |
| Display Screen | 2.7-inch monochrome backlit LCD with font zoom | Full-color graphic LCD with dynamic info-graphing | Color green, yellow, and red zones on the Insight Plus highlight out-of-range excess air fast in dark rooms. |
| Onboard Diagnostics | Standard real-time gas and efficiency calculations | Adds Tune-Rite on-demand troubleshooting assistant | Tune-Rite flags abnormal stack temperature or excess air and points newer techs toward mechanical root causes. |
| Selectable Fuels | 6 North American fuels (NG, Propane, Oil No. 2 and 6, Kerosene, B5) | 9 standard fuels (adds Oil No. 4, Coal, Wood) plus 2 custom fuels | Insight Plus covers heavy commercial fuel oils and custom gas blends. |
| Internal Memory | 10 complete test records | 100 complete test records | Insight Plus holds an entire week of commercial rooftop or boiler routes without clearing memory. |
| Included Case and Gear | Soft nylon case, 12-inch probe, 1 installed filter (no boot) | Hard-shell case, magnetic rubber boot, 12-inch probe, 3 spare filters | Insight Plus arrives ready for rough truck storage and hands-free mounting on steel boiler jackets. |
Job-by-Job Breakdown: Which Analyzer Fits Your Daily Route?
The biggest mistake technicians make is buying too little analyzer for commercial boiler work. The second mistake is overpaying for commercial features they never touch in suburban basements. Here is the exact breakdown of which jobs belong to each tool.
Jobs Where the Fyrite InTech (H0024-8511) is the Best Choice
- Routine Residential Furnace Maintenance: If your winter schedule covers eight to ten gas furnace tune-ups daily, the InTech shines. It boots in 30 to 60 seconds and verifies O2, efficiency, and air-free CO fast.
- Residential Water Heater and Atmospheric Boiler Checks: When checking draft hoods for carbon monoxide spillage or heat exchanger cracks, the InTech delivers trustworthy numbers without menu clutter.
- Standard Residential No. 2 Oil Burner Tune-Ups: Built-in Oil No. 2 and Kerosene curves let oil techs dial in air bands cleanly when paired with a separate draft gauge.
- Equipping Junior Techs and Install Crews: Install crews can verify safe combustion startup on every new furnace without risking a high-dollar commercial meter.
Jobs Where the Fyrite Insight Plus (H0024-8517) is the Best Choice
- Modulating Furnaces and Condensing Boilers: Two-stage and variable-capacity systems require precise low-fire and high-fire manifold pressure tuning. The Insight Plus shows differential gas pressure right next to live O2 and CO readings.
- Light-Commercial Rooftop Units and Make-Up Air Heaters: The magnetic rubber boot sticks securely to steel RTU cabinets in harsh wind. Its 100-record memory logs every rooftop unit on a building in one trip.
- Commercial Atmospheric and Power-Burner Boilers: High-input commercial boilers produce elevated nitric oxide that fools standard CO sensors. The Insight Plus uses an integral NOx filter while verifying chimney draft simultaneously.
- Heavy Oil and Multi-Fuel Commercial Systems: Service routes covering No. 4 oil, heavy No. 6 oil, or custom gas blends benefit from nine built-in fuels plus two custom curves.
Pro Tip for Commercial and Industrial Technicians
Even though the Fyrite Insight Plus H0024-8517 includes an integral NOx filter, remember that NOx filtering is not NOx measurement. The filter scrubs nitric oxide out of the sample to keep CO readings accurate. However, the Insight Plus does not display raw NO, NO2, or total NOx values. If local air-quality rules require logged NOx emissions compliance, step up to the Bacharach PCA 400.
Real-World Field Analysis: How They Perform on the Job
What Problem Do These Analyzers Solve, and How Well Do They Work?
Eyeballing flame color and clocking gas meters belonged to standing-pilot cast-iron furnaces. On modern modulating gas valves and condensing heat exchangers, a furnace can produce unsafe CO while the flame looks blue. Both Bacharach analyzers turn invisible combustion faults into hard numbers in under two minutes.
In a real basement or mechanical room, both units follow the same startup routine. You power the analyzer on in fresh air and wait 30 to 60 seconds for the zero purge. Next, you insert the 12-inch stainless steel probe into the flue test port. Oxygen settles in under 20 seconds, and CO locks in within 40 seconds.
Where you immediately feel the difference in the field is workflow speed. With the InTech H0024-8511, you set the meter down and grab a separate digital manometer for draft or gas pressure. With the Insight Plus H0024-8517, you mount the magnetic boot on the furnace door and connect your pressure hose directly to the analyzer. You watch gas pressure, O2, stack temperature, and CO adjust live on one color screen.
Display, Ergonomics, and Hardware Protection
Both analyzers smartly avoid capacitive glass touchscreens. When your hands are wet from condensate traps or covered in winter gloves, physical push buttons work every single time.
However, the packaging choices from Bacharach create a huge ergonomic gap between these two kits:
- InTech H0024-8511: Uses a 2.7-inch backlit monochrome LCD with zoomable digits. Because this kit omits the magnetic boot and ships in a soft nylon pouch, you cannot hang the meter on sheet metal.
- Insight Plus H0024-8517: Steps up to a full-color graphic screen with green, yellow, and red status bars. It ships inside a molded hard-shell carrying case with the magnetic rubber boot installed and three spare particulate filters.
Sensors, Over-Range Protection, and Cost of Ownership
Both Bacharach analyzers earn massive respect from veteran service techs for sensor protection and easy maintenance. Both models feature automatic CO over-range pump shut-off protection. If you stick your probe into a sooting oil burner dumping extreme CO, the pump shuts down before over-range gas poisons the cell.
Even better, both units use Bacharach B-Smart pre-calibrated CO sensors. You never have to ship your analyzer to a lab and lose your tool for two weeks in January. You order a pre-calibrated sensor, open the rear compartment on your tailgate, and snap in the new cell in three minutes.
The Insight Plus H0024-8517 pushes long-term reliability even further. It pairs the B-Smart CO cell with a three-year Long-Life O2 sensor and adds the integral NOx filter for commercial burners.
Data Management and Customer Reporting
Neither model includes native Bluetooth streaming, and both run on four standard AA batteries. Most field techs prefer AA batteries because you can swap fresh cells from your glovebox in seconds instead of waiting on a charger.
For customer documentation, both analyzers generate an on-screen QR code after saving a test. You scan the display with the free Bacharach Combustion App on your phone and email a clean PDF report before leaving the site.
The practical difference comes down to internal storage capacity:
- InTech H0024-8511: Holds only 10 test records. On a busy winter maintenance day, you must scan and clear tests regularly or run out of slots by lunchtime.
- Insight Plus H0024-8517: Stores 100 test records and supports PC downloads via Fyrite User Software using a standard mini-USB cable.
Advantages and Limitations of Each Model
Bacharach Fyrite InTech (H0024-8511) Advantages (Pros)
- Lowest Upfront Cost: Delivers core O2, CO, temperature, and efficiency diagnostics without paying for commercial extras you may not need.
- Zero-Downtime B-Smart CO Sensor Swaps: Pre-calibrated replacement CO sensors install in minutes in the field without factory shipping delays.
- Automatic CO Over-Range Shut-Off: Protects the electrochemical CO cell from permanent damage during high-CO fault diagnostics.
- Featherweight One-Pound Design: Easy to carry in one hand through tight attics, crawlspaces, and residential utility closets.
- Fast QR-to-Phone PDF Reporting: Sends clean combustion reports to customers via the free smartphone app without Bluetooth pairing issues.
Bacharach Fyrite InTech (H0024-8511) Limitations (Cons)
- No Built-In Draft or Gas Pressure Manometer: Requires carrying and setting up a second instrument for chimney draft or manifold pressure checks.
- No Magnetic Boot or Hard Case in H0024-8511 Kit: Ships in a soft nylon bag without magnets, preventing hands-free furnace cabinet mounting out of the box.
- 10-Record Memory Limit: Fills up quickly during high-volume residential maintenance routes if you forget to offload tests.
Bacharach Fyrite Insight Plus (H0024-8517) Advantages (Pros)
- All-in-One Combustion, Draft, and Gas Pressure: Integrated differential pressure ports verify chimney draft and manifold gas pressure on the same screen as O2 and CO.
- Three-Year Long-Life O2 Sensor and B-Smart CO Cell: Extends O2 sensor service life to three years while preserving rapid tailgate CO sensor replacements.
- 4,000 ppm CO Ceiling with Integral NOx Filter: Handles heavy commercial burner startups and eliminates nitric oxide cross-sensitivity on CO readings.
- Jobsite-Ready Hard Case, Magnetic Boot, and Spare Filters: Includes rugged truck storage, hands-free mounting magnets, and three spare water-trap filters in the box.
- 100-Record Memory and Tune-Rite Diagnostics: Logs full commercial routes and provides on-screen mechanical troubleshooting guidance on a color graphic display.
Bacharach Fyrite Insight Plus (H0024-8517) Limitations (Cons)
- Higher Initial Purchase Price: Represents a steeper upfront investment if you only service basic residential gas furnaces.
- No Native Bluetooth Streaming: Relies on optical QR code scanning or wired USB downloads rather than continuous live Bluetooth data logging.
- Standard Kit Omits Mini-USB Cable and Printer: Technicians who want wired PC software transfers must supply their own mini-USB cord or buy the H0024-8518 kit.
Technician-Focused Comparison FAQs
1. Do both analyzers use the same replacement CO sensor?
No. While both use plug-and-play B-Smart pre-calibrated sensors, the Fyrite InTech uses a standard 0 to 2,000 ppm CO sensor. The Fyrite Insight Plus uses a 0 to 4,000 ppm B-Smart CO sensor equipped with an integral NOx filter. Always verify the exact sensor part number before ordering.
2. Can I add a magnetic boot and hard case to the Fyrite InTech H0024-8511 later?
Yes. Bacharach sells the magnetic rubber boot separately. You can also buy the Fyrite InTech H0024-8523 kit, which includes both the hard case and magnetic boot. However, even with those accessories, the InTech still lacks draft pressure ports and the NOx filter.
3. Why does the NOx filter on the Insight Plus matter if I only work on gas equipment?
On standard residential atmospheric furnaces, nitric oxide levels stay low enough that a standard CO cell works fine. However, high-input commercial power burners and modulating boilers generate enough nitric oxide to cause falsely high CO readings. If you service commercial burners, the Insight Plus keeps your CO numbers accurate.
4. Which analyzer is faster to use when commissioning a two-stage or modulating gas furnace?
The Fyrite Insight Plus H0024-8517 is noticeably faster. Because it measures differential gas pressure and flue gas simultaneously, you connect one hose to the gas valve tap and drop the probe in the flue. You then mount the analyzer magnetically and dial in low-fire and high-fire pressures without touching a second meter.
5. Do either of these models require annual factory calibration?
Neither model forces you to ship the analyzer away for annual factory calibration. Both feature field-replaceable O2 cells and pre-calibrated B-Smart CO sensors. Each replacement B-Smart sensor carries its factory calibration data on an onboard memory chip.
Final Technician Verdict: Choosing the Right Bacharach for Your Truck
Both the Bacharach Fyrite InTech (H0024-8511) and Bacharach Fyrite Insight Plus (H0024-8517) pass the ultimate jobsite test. They deliver fast, accurate combustion numbers and eliminate annual calibration shipping delays through B-Smart sensor swaps. Choosing between them comes down to matching the tool to your daily work orders.
- Choose the Bacharach Fyrite InTech (H0024-8511): Pick this model if your daily route is 75% or more residential furnaces, water heaters, and basic boilers. It keeps your upfront tool cost low while giving you reliable O2, CO, and efficiency diagnostics.
- Choose the Bacharach Fyrite Insight Plus (H0024-8517): Pick this model if you are a light-commercial technician, boiler mechanic, or senior residential tech servicing modulating systems and rooftop units. Built-in draft and gas pressure ports, a magnetic boot, a hard case, a 4,000 ppm NOx-filtered CO cell, and a three-year O2 sensor pay you back every week.